#!/usr/bin/env dub
/+ dub.sdl:
name "uom_quantity_vector_composition"
dependency "sparkles:math" path="../../../.."
dflags "-preview=in" "-preview=dip1000"
targetPath "build"
+/
/**
* Units of measure ⋈ linear algebra — the two orderings, head to head, and a
* co-design recommendation for `sparkles:math`.
*
* A dimensioned 3-vector (a raytracer position or edge) can be built two ways:
*
* A. `Quantity!(dim, Vec3)` — the dimension wraps a numeric `Vector`. Works
* with the current `sparkles:math.Vector` unchanged; one dimension for the
* whole vector. But `Vector.dot` is dimension-blind (`cast(CommonType)`),
* so the caller must re-attach the grade (dot of two length-vectors is an
* area), and `Vector` ships no 3-D `cross`/`magnitude`/`normalize`.
*
* B. `Vector!(Quantity!dim, N)` — a vector *of* dimensioned scalars. This is
* what you actually want to write, and it **does not compile today**: the
* library constrains `struct Vector(T, N) if (isNumeric!T)`, and a
* `Quantity` is not `isNumeric`. Relaxing that to an `isScalar` capability
* concept (supports `+ - * /`) makes a vector of quantities work, and — the
* payoff — `dot` returns the *element's* product type, so `dot(length-vec,
* length-vec)` is an area *for free*, with no cast. This file reimplements a
* ~30-line element-generic `Vec(Scalar, N)` to demonstrate B.
*
* The recommendation this yields for the `sparkles:math` redesign (which is open):
* 1. Relax `Vector`'s `isNumeric!T` to an `isScalar!T` capability concept so a
* `Quantity` is a valid element (ordering B).
* 2. Make `dot`/`cross`/`magnitude` element-type-driven (dimension-correct),
* not `cast(CommonType)`; add the missing 3-D `cross`/`magnitude`/`normalize`.
* 3. Add an N-generic, unit-aware affine `Point!(dim,N)`/`Vec!(dim,N)` split
* (ordering C) — the same affine separation the 2-D math-evolution plan wants
* (see quantity-affine-torsor.d).
*
* Companion to docs/research/units-of-measure/theory/type-system-mechanisms.md
* and docs/research/units-of-measure/theory/torsor-representation.md.
*
* Run with: `dub run --single quantity-vector-composition.d`
*/
module (module) uom_quantity_vector_compositionUnits of measure ⋈ linear algebra — the two orderings, head to head, and a
co-design recommendation for sparkles:math.
A dimensioned 3-vector (a raytracer position or edge) can be built two ways:
A. Quantity!(dim, Vec3) — the dimension wraps a numeric Vector. Works
with the current sparkles:math.Vector unchanged; one dimension for the
whole vector. But Vector.dot is dimension-blind (cast(CommonType)),
so the caller must re-attach the grade (dot of two length-vectors is an
area), and Vector ships no 3-D cross/magnitude/normalize.
B. Vector!(Quantity!dim, N) — a vector of dimensioned scalars. This is
what you actually want to write, and it does not compile today: the
library constrains struct Vector(T, N) if (isNumeric!T), and a
Quantity is not isNumeric. Relaxing that to an isScalar capability
concept (supports + - * /) makes a vector of quantities work, and — the
payoff — dot returns the element's product type, so dot(length-vec,
length-vec) is an area for free, with no cast. This file reimplements a
~30-line element-generic Vec(Scalar, N) to demonstrate B.
The recommendation this yields for the sparkles:math redesign (which is open):
Relax Vector's isNumeric!T to an isScalar!T capability concept so a
Quantity is a valid element (ordering B).
Make dot/cross/magnitude element-type-driven (dimension-correct),
not cast(CommonType); add the missing 3-D cross/magnitude/normalize.
Add an N-generic, unit-aware affine Point!(dim,N)/Vec!(dim,N) split
(ordering C) — the same affine separation the 2-D math-evolution plan wants
(see quantity-affine-torsor.d).
Companion to docs/research/units-of-measure/theory/type-system-mechanisms.md
and docs/research/units-of-measure/theory/torsor-representation.md.
Run with: dub run --single quantity-vector-composition.d
uom_quantity_vector_composition;
import (package) sparklessparkles.(package) sparkles.mathmath.(module) sparkles.math.vectorVector primitives for linear algebra in game and graphics code.
Provides a fixed-size numeric vector type with optional named fields,
component-wise arithmetic, scalar operations, dot product, and aliases
for common vector sizes.
vector : (alias struct) uom_quantity_vector_composition.Vector = sparkles.math.vector.Vector(T, ulong N, string[] fieldNames = makeDefaultFieldNames!N) if (isNumeric!T && (N > 0))Fixed-size numeric vector with optional named components.
Vector;
import (package) stdstd.(module) std.traitsTemplates which extract information about types and symbols at compile time.
Category Templates Symbol Name traits fullyQualifiedName mangledName moduleName packageName Function traits isFunction arity functionAttributes hasFunctionAttributes functionLinkage FunctionTypeOf isSafe isUnsafe isFinal ParameterDefaults ParameterIdentifierTuple ParameterStorageClassTuple Parameters ReturnType SetFunctionAttributes variadicFunctionStyle Aggregate Type traits BaseClassesTuple BaseTypeTuple classInstanceAlignment EnumMembers FieldNameTuple Fields hasAliasing hasElaborateAssign hasElaborateCopyConstructor hasElaborateDestructor hasElaborateMove hasIndirections hasMember hasStaticMember hasNested hasUnsharedAliasing InterfacesTuple isInnerClass isNested MemberFunctionsTuple RepresentationTypeTuple TemplateArgsOf TemplateOf TransitiveBaseTypeTuple Type Conversion CommonType AllImplicitConversionTargets ImplicitConversionTargets CopyTypeQualifiers CopyConstness isAssignable isCovariantWith isImplicitlyConvertible isQualifierConvertible Type Constructors InoutOf ConstOf SharedOf SharedInoutOf SharedConstOf SharedConstInoutOf ImmutableOf QualifierOf Categories of types allSameType ifTestable isType isAggregateType isArray isAssociativeArray isAutodecodableString isBasicType isBoolean isBuiltinType isCopyable isDynamicArray isEqualityComparable isFloatingPoint isIntegral isNarrowString isConvertibleToString isNumeric isOrderingComparable isPointer isScalarType isSigned isSIMDVector isSomeChar isSomeString isStaticArray isUnsigned Type behaviours isAbstractClass isAbstractFunction isCallable isDelegate isExpressions isFinalClass isFinalFunction isFunctionPointer isInstanceOf isIterable isMutable isSomeFunction isTypeTuple General Types ForeachType KeyType Largest mostNegative OriginalType PointerTarget Signed Unconst Unshared Unqual Unsigned ValueType Promoted Misc lvalueOf rvalueOf Select select User-Defined Attributes hasUDA getUDAs getSymbolsByUDA
Source
std/traits.d
traits : (alias template) uom_quantity_vector_composition.Unqual = core.internal.traits.Unqual(T : const(U), U)taken from std.traits.Unqual
Unqual;
/// The numeric payload used by ordering A.
alias (alias) uom_quantity_vector_composition.Vec3 = sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"])The numeric payload used by ordering A.
Vec3 = (struct) sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"])Fixed-size numeric vector with optional named components.
Vector!(double, 3);
/// A dimension: an exponent vector in `ℤ³` over (mass, length, time).
struct (struct) uom_quantity_vector_composition.DimA dimension: an exponent vector in ℤ³ over (mass, length, time).
Dim
{
int (field) int uom_quantity_vector_composition.Dim.massmass;
int (field) int uom_quantity_vector_composition.Dim.lengthlength;
int (field) int uom_quantity_vector_composition.Dim.timetime;
}
(struct) uom_quantity_vector_composition.DimA dimension: an exponent vector in ℤ³ over (mass, length, time).
Dim uom_quantity_vector_composition.Dim uom_quantity_vector_composition.combine(in uom_quantity_vector_composition.Dim a, in uom_quantity_vector_composition.Dim b, in int sign) pure nothrow @nogc @safecombine(in (struct) uom_quantity_vector_composition.DimA dimension: an exponent vector in ℤ³ over (mass, length, time).
Dim (parameter) const(uom_quantity_vector_composition.Dim) aa, in (struct) uom_quantity_vector_composition.DimA dimension: an exponent vector in ℤ³ over (mass, length, time).
Dim (parameter) const(uom_quantity_vector_composition.Dim) bb, in int (parameter) const(int) signsign) @safe pure nothrow @nogc
in ((parameter) const(int) signsign == 1 || (parameter) const(int) signsign == -1)
=> (struct) uom_quantity_vector_composition.DimA dimension: an exponent vector in ℤ³ over (mass, length, time).
Dim(
mass: (parameter) const(uom_quantity_vector_composition.Dim) aa.(field) int uom_quantity_vector_composition.Dim.massmass + (parameter) const(int) signsign * (parameter) const(uom_quantity_vector_composition.Dim) bb.(field) int uom_quantity_vector_composition.Dim.massmass,
length: (parameter) const(uom_quantity_vector_composition.Dim) aa.(field) int uom_quantity_vector_composition.Dim.lengthlength + (parameter) const(int) signsign * (parameter) const(uom_quantity_vector_composition.Dim) bb.(field) int uom_quantity_vector_composition.Dim.lengthlength,
time: (parameter) const(uom_quantity_vector_composition.Dim) aa.(field) int uom_quantity_vector_composition.Dim.timetime + (parameter) const(int) signsign * (parameter) const(uom_quantity_vector_composition.Dim) bb.(field) int uom_quantity_vector_composition.Dim.timetime,
);
(alias) object.string = stringstring string uom_quantity_vector_composition.unitString(in uom_quantity_vector_composition.Dim d) pure @safeunitString(in (struct) uom_quantity_vector_composition.DimA dimension: an exponent vector in ℤ³ over (mass, length, time).
Dim (parameter) const(uom_quantity_vector_composition.Dim) dd) @safe pure
{
import (package) stdstd.(module) std.convA one-stop shop for converting values from one type to another.
Category Functions Generic asOriginalType castFrom parse to toChars bitCast Strings text wtext dtext writeText writeWText writeDText hexString Numeric octal roundTo signed unsigned Exceptions ConvException ConvOverflowException
Source
std/conv.d
conv : (alias template) to = std.conv.to(T)The to template converts a value from one type _to another.
The source type is deduced and the target type must be specified, for example the
expression to!int(42.0) converts the number 42 from
double _to int. The conversion is "safe", i.e.,
it checks for overflow; to!int(4.2e10) would throw the
ConvOverflowException exception. Overflow checks are only
inserted when necessary, e.g., to!double(42) does not do
any checking because any int fits in a double.
Conversions from string _to numeric types differ from the C equivalents
atoi() and atol() by checking for overflow and not allowing whitespace.
For conversion of strings _to signed types, the grammar recognized is:
$(PRE $(I Integer):
$(I Sign UnsignedInteger)
$(I UnsignedInteger)
$(I Sign):
$(B +)
$(B -))
For conversion _to unsigned types, the grammar recognized is:
$(PRE $(I UnsignedInteger):
$(I DecimalDigit)
$(I DecimalDigit) $(I UnsignedInteger))
to;
(alias) object.string = stringstring (local variable) string resultresult;
void void uom_quantity_vector_composition.unitString.put(in string symbol, in int exp) pure nothrow @safeput(in (alias) object.string = stringstring (parameter) const(string) symbolsymbol, in int (parameter) const(int) expexp)
{
if ((parameter) const(int) expexp == 0)
return;
if ((local variable) string resultresult.(field) ulong string.lengthlength > 0)
(local variable) string resultresult ~= ' ';
(local variable) string resultresult ~= (parameter) const(string) symbolsymbol;
if ((parameter) const(int) expexp != 1)
(local variable) string resultresult ~= "^" ~ (parameter) const(int) expexp.string std.conv.to!string.to!(const(int))(const(int) __param_0) pure nothrow @safeThe to template converts a value from one type to another.
The source type is deduced and the target type must be specified, for example the
expression to`!int(42.0)` converts the number 42 from
`double` to `int`. The conversion is "safe", i.e.,
it checks for overflow; to!int(4.2e10) would throw the
ConvOverflowException exception. Overflow checks are only
inserted when necessary, e.g., ``to!double(42) does not do
any checking because any int fits in a double.
Conversions from string to numeric types differ from the C equivalents
atoi() and atol() by checking for overflow and not allowing whitespace.
For conversion of strings to signed types, the grammar recognized is:
Integer:
Sign UnsignedInteger
UnsignedInteger
Sign:
+
-
For conversion to unsigned types, the grammar recognized is:
UnsignedInteger:
DecimalDigit
DecimalDigit UnsignedInteger
Examples
Converting a value to its own type (useful mostly for generic code)
simply returns its argument.
int a = 42;
int b = to!int(a);
double c = to!double(3.14); // c is double with value 3.14
Converting among numeric types is a safe way to cast them around.
Conversions from floating-point types to integral types allow loss of
precision (the fractional part of a floating-point number). The
conversion is truncating towards zero, the same way a cast would
truncate. (To round a floating point value when casting to an
integral, use roundTo.)
import std.exception : assertThrown;
int a = 420;
assert(to!long(a) == a);
assertThrown!ConvOverflowException(to!byte(a));
assert(to!int(4.2e6) == 4200000);
assertThrown!ConvOverflowException(to!uint(-3.14));
assert(to!uint(3.14) == 3);
assert(to!uint(3.99) == 3);
assert(to!int(-3.99) == -3);
When converting strings to numeric types, note that D hexadecimal and binary
literals are not handled. Neither the prefixes that indicate the base, nor the
horizontal bar used to separate groups of digits are recognized. This also
applies to the suffixes that indicate the type.
To work around this, you can specify a radix for conversions involving numbers.
auto str = to!string(42, 16);
assert(str == "2A");
auto i = to!int(str, 16);
assert(i == 42);
Conversions from integral types to floating-point types always
succeed, but might lose accuracy. The largest integers with a
predecessor representable in floating-point format are 2^24-1 for
float, 2^53-1 for double, and 2^64-1 for real (when
real is 80-bit, e.g. on Intel machines).
// 2^24 - 1, largest proper integer representable as float
int a = 16_777_215;
assert(to!int(to!float(a)) == a);
assert(to!int(to!float(-a)) == -a);
Conversion from string types to char types enforces the input
to consist of a single code point, and said code point must
fit in the target type. Otherwise, ConvException is thrown.
import std.exception : assertThrown;
assert(to!char("a") == 'a');
assertThrown(to!char("ñ")); // 'ñ' does not fit into a char
assert(to!wchar("ñ") == 'ñ');
assertThrown(to!wchar("😃")); // '😃' does not fit into a wchar
assert(to!dchar("😃") == '😃');
// Using wstring or dstring as source type does not affect the result
assert(to!char("a"w) == 'a');
assert(to!char("a"d) == 'a');
// Two code points cannot be converted to a single one
assertThrown(to!char("ab"));
Converting an array to another array type works by converting each
element in turn. Associative arrays can be converted to associative
arrays as long as keys and values can in turn be converted.
import std.string : split;
int[] a = [1, 2, 3];
auto b = to!(float[])(a);
assert(b == [1.0f, 2, 3]);
string str = "1 2 3 4 5 6";
auto numbers = to!(double[])(split(str));
assert(numbers == [1.0, 2, 3, 4, 5, 6]);
int[string] c;
c["a"] = 1;
c["b"] = 2;
auto d = to!(double[wstring])(c);
assert(d["a"w] == 1 && d["b"w] == 2);
Conversions operate transitively, meaning that they work on arrays and
associative arrays of any complexity.
This conversion works because to`!short` applies to an `int`, to!wstring
applies to a string, to`!string` applies to a `double`, and
to!(double[]) applies to an int[]. The conversion might throw an
exception because ``to!short might fail the range check.
int[string][double[int[]]] a;
auto b = to!(short[wstring][string[double[]]])(a);
Object-to-object conversions by dynamic casting throw exception when
the source is non-null and the target is null.
import std.exception : assertThrown;
// Testing object conversions
class A {}
class B : A {}
class C : A {}
A a1 = new A, a2 = new B, a3 = new C;
assert(to!B(a2) is a2);
assert(to!C(a3) is a3);
assertThrown!ConvException(to!B(a3));
Stringize conversion from all types is supported.
String to string conversion works for any two string types having
(char, wchar, dchar) character widths and any
combination of qualifiers (mutable, const, or immutable).
Converts array (other than strings) to string.
Each element is converted by calling ``to!T.
Associative array to string conversion.
Each element is converted by calling ``to!T.
Object to string conversion calls toString against the object or
returns "null" if the object is null.
Struct to string conversion calls toString against the struct if
it is defined.
For structs that do not define toString, the conversion to string
produces the list of fields.
Enumerated types are converted to strings as their symbolic names.
Boolean values are converted to "true" or "false".
char, wchar, dchar to a string type.
Unsigned or signed integers to strings.
: Convert integral value to string in radix radix.
radix must be a value from 2 to 36.
value is treated as a signed value only if radix is 10.
The characters A through Z are used to represent values 10 through 36
and their case is determined by the letterCase parameter.
All floating point types to all string types.
Pointer to string conversions convert the pointer to a size_t value.
If pointer is char*, treat it as C-style strings.
In that case, this function is @system.
See formatValue on how toString should be defined.
// Conversion representing dynamic/static array with string
long[] a = [ 1, 3, 5 ];
assert(to!string(a) == "[1, 3, 5]");
// Conversion representing associative array with string
int[string] associativeArray = ["0":1, "1":2];
assert(to!string(associativeArray) == `["0":1, "1":2]` ||
to!string(associativeArray) == `["1":2, "0":1]`);
// char* to string conversion
assert(to!string(cast(char*) null) == "");
assert(to!string("foo\0".ptr) == "foo");
// Conversion reinterpreting void array to string
auto w = "abcx"w;
const(void)[] b = w;
assert(b.length == 8);
auto c = to!(wchar[])(b);
assert(c == "abcx");
Strings can be converted to enum types. The enum member with the same name as the
input string is returned. The comparison is case-sensitive.
A ConvException is thrown if the enum does not have the specified member.
import std.exception : assertThrown;
enum E { a, b, c }
assert(to!E("a") == E.a);
assert(to!E("b") == E.b);
assertThrown!ConvException(to!E("A"));
to!(alias) object.string = stringstring;
}
void uom_quantity_vector_composition.unitString.put(in string symbol, in int exp) pure nothrow @safeput("kg", (parameter) const(uom_quantity_vector_composition.Dim) dd.(field) int uom_quantity_vector_composition.Dim.massmass);
void uom_quantity_vector_composition.unitString.put(in string symbol, in int exp) pure nothrow @safeput("m", (parameter) const(uom_quantity_vector_composition.Dim) dd.(field) int uom_quantity_vector_composition.Dim.lengthlength);
void uom_quantity_vector_composition.unitString.put(in string symbol, in int exp) pure nothrow @safeput("s", (parameter) const(uom_quantity_vector_composition.Dim) dd.(field) int uom_quantity_vector_composition.Dim.timetime);
return (local variable) string resultresult.(field) ulong string.lengthlength > 0 ? (local variable) string resultresult : "(dimensionless)";
}
/// A graded quantity — the scalar `double` case is a valid `isScalar` element for
/// ordering B; the `Vec3` case is ordering A.
struct (struct) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"]))A graded quantity — the scalar double case is a valid isScalar element for
ordering B; the Vec3 case is ordering A.
Quantity(Dim dim, Payload = double)
{
(alias) Payload = sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"])Payload (field) sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"]) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"])).valuevalue;
enum (alias) object.string = stringstring (constant) string uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"])).symbol = "m"symbol = string uom_quantity_vector_composition.unitString(in uom_quantity_vector_composition.Dim d) pure @safeunitString((constant) uom_quantity_vector_composition.Dim uom_quantity_vector_composition.dim = Dim(0, 1, 0)dim);
(struct) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double)A graded quantity — the scalar double case is a valid isScalar element for
ordering B; the Vec3 case is ordering A.
Quantity Quantity opBinary(string op)(in Quantity rhs) constopBinary(string op)(in (struct) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double)A graded quantity — the scalar double case is a valid isScalar element for
ordering B; the Vec3 case is ordering A.
Quantity (parameter) Quantity rhsrhs) const
if (op == "+" || op == "-")
=> (struct) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double)Quantity(mixin("value " ~ op ~ " rhs.value"));
auto auto opBinary(string op, Dim rhsDim, RP)(in Quantity!(rhsDim, RP) rhs) constopBinary(string op, Dim rhsDim, RP)(in (struct) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)A graded quantity — the scalar double case is a valid isScalar element for
ordering B; the Vec3 case is ordering A.
Quantity!(rhsDim, RP) (parameter) Quantity!(rhsDim, RP) rhsrhs) const
if (op == "*" || op == "/")
{
auto _error_ pp = mixin("value " ~ op ~ " rhs.value");
return (template instance) Quantity!(combine(dim, rhsDim, op == "*" ? 1 : -1), Unqual!(typeof(p)))Quantity!(combine(dim, rhsDim, op == "*" ? 1 : -1), (alias) core.internal.traits.Unqual!(const(double), double) = doubletaken from std.traits.Unqual
Unqual!(typeof((local variable) const(double) pp)))((local variable) const(double) pp);
}
(alias) object.string = stringstring string uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"])).toString() const pure @safetoString() const @safe
{
import (package) stdstd.(module) std.arrayFunctions and types that manipulate built-in arrays and associative arrays.
This module provides all kinds of functions to create, manipulate or convert arrays:
Function Name Description
| array |
Returns a copy of the input in a newly allocated dynamic array.
|
| appender |
Returns a new Appender or RefAppender initialized with a given array.
|
| assocArray |
Returns a newly allocated associative array from a range/ranges of keys and values.
|
| byPair |
Construct a range iterating over an associative array by key/value tuples.
|
| insertInPlace |
Inserts into an existing array at a given position.
|
| join |
Concatenates a range of ranges into one array.
|
| minimallyInitializedArray |
Returns a new array of type T.
|
| replace |
Returns a new array with all occurrences of a certain subrange replaced.
|
| replaceFirst |
Returns a new array with the first occurrence of a certain subrange replaced.
|
| replaceInPlace |
Replaces all occurrences of a certain subrange and puts the result into a given array.
|
| replaceInto |
Replaces all occurrences of a certain subrange and puts the result into an output range.
|
| replaceLast |
Returns a new array with the last occurrence of a certain subrange replaced.
|
| replaceSlice |
Returns a new array with a given slice replaced.
|
| replicate |
Creates a new array out of several copies of an input array or range.
|
| sameHead |
Checks if the initial segments of two arrays refer to the same
place in memory.
|
| sameTail |
Checks if the final segments of two arrays refer to the same place
in memory.
|
| split |
Eagerly split a range or string into an array.
|
| staticArray |
Creates a new static array from given data.
|
| uninitializedArray |
Returns a new array of type T without initializing its elements.
|
Source
std/array.d
array : (alias template) appender = std.array.appender(A)() if (isDynamicArray!A)Convenience function that returns an $(LREF Appender) instance,
optionally initialized with array.
appender;
import (package) stdstd.(module) std.formatThis package provides string formatting functionality using
printf style format strings.
Submodule Function Name Description package format Converts its arguments according to a format string into a string.
| package |
sformat |
Converts its arguments according to a format string into a buffer. |
| package |
FormatException |
Signals a problem while formatting. |
| write |
formattedWrite |
Converts its arguments according to a format string and writes
the result to an output range. |
| write |
formatValue |
Formats a value of any type according to a format specifier and
writes the result to an output range. |
| read |
formattedRead |
Reads an input range according to a format string and stores the read
values into its arguments. |
| read |
unformatValue |
Reads a value from the given input range and converts it according to
a format specifier. |
| spec |
FormatSpec |
A general handler for format strings. |
| spec |
singleSpec |
Helper function that returns a FormatSpec for a single format specifier. |
Limitation
This package does not support localization, but
adheres to the rounding mode of the floating point unit, if
available.
Format Strings
The functions contained in this package use format strings. A
format string describes the layout of another string for reading or
writing purposes. A format string is composed of normal text
interspersed with format specifiers. A format specifier starts
with a percentage sign '%', optionally followed by one or more
parameters and ends with a format indicator. A format
indicator may be a simple format character or a compound
indicator.
Format strings are composed according to the following grammar:
FormatString:
FormatStringItem FormatString
FormatStringItem:
Character
FormatSpecifier
FormatSpecifier:
'%' Parameters FormatIndicator
FormatIndicator:
FormatCharacter
CompoundIndicator
FormatCharacter:
see remark below
CompoundIndicator:
'(' FormatString '%)'
'(' FormatString '%|' Delimiter '%)'
Delimiter
empty
Character Delimiter
Parameters:
Position Flags Width Precision Separator
Position:
empty
Integer '$'**
*Integer* **':'** *Integer* **'$'
Integer ':' '$'**
*Flags*:
*empty*
*Flag* *Flags*
*Flag*:
**'-'**|**'+'**|**' '**|**'0'**|**'#'**|**'='**
*Width*:
*OptionalPositionalInteger*
*Precision*:
*empty*
**'.'** *OptionalPositionalInteger*
*Separator*:
*empty*
**','** *OptionalInteger*
**','** *OptionalInteger* **'?'**
*OptionalInteger*:
*empty*
*Integer*
**'*'**
*OptionalPositionalInteger*:
*OptionalInteger*
**'*'** *Integer* **'$'
Character
'%%'
AnyCharacterExceptPercent
Integer:
NonZeroDigit Digits
Digits:
empty
Digit Digits
NonZeroDigit:
'1'|'2'|'3'|'4'|'5'|'6'|'7'|'8'|'9'
Digit:
'0'|'1'|'2'|'3'|'4'|'5'|'6'|'7'|'8'|'9'
Note
FormatCharacter is unspecified. It can be any character
that has no other purpose in this grammar, but it is
recommended to assign (lower- and uppercase) letters.
Note
The Parameters of a CompoundIndicator are currently
limited to a '-' flag.
Format Indicator
The format indicator can either be a single character or an
expression surrounded by '%(' and '%)'. It specifies the
basic manner in which a value will be formatted and is the minimum
requirement to format a value.
The following characters can be used as format characters:
FormatCharacter Semantics 's' To be formatted in a human readable format. Can be used with all types. 'c' To be formatted as a character. 'd' To be formatted as a signed decimal integer. 'u' To be formatted as a decimal image of the underlying bit representation. 'b' To be formatted as a binary image of the underlying bit representation. 'o' To be formatted as an octal image of the underlying bit representation. 'x' / 'X' To be formatted as a hexadecimal image of the underlying bit representation. 'e' / 'E' To be formatted as a real number in decimal scientific notation. 'f' / 'F' To be formatted as a real number in decimal natural notation. 'g' / 'G' To be formatted as a real number in decimal short notation. Depending on the number, a scientific notation or a natural notation is used. 'a' / 'A' To be formatted as a real number in hexadecimal scientific notation. 'r' To be formatted as raw bytes. The output may not be printable and depends on endianness.
The compound indicator can be used to describe compound types
like arrays or structs in more detail. A compound type is enclosed
within '%(' and '%)'. The enclosed sub-format string is
applied to individual elements. The trailing portion of the
sub-format string following the specifier for the element is
interpreted as the delimiter, and is therefore omitted following the
last element. The '%|' specifier may be used to explicitly
indicate the start of the delimiter, so that the preceding portion of
the string will be included following the last element.
The format string inside of the compound indicator should
contain exactly one format specifier (two in case of associative
arrays), which specifies the formatting mode of the elements of the
compound type. This format specifier can be a compound
indicator itself.
Note
Inside a compound indicator, strings and characters are
escaped automatically. To avoid this behavior, use "%-("
instead of "%(".
Flags
There are several flags that affect the outcome of the formatting.
Flag Semantics '-' When the formatted result is shorter than the value given by the width parameter, the output is left justified. Without the '-' flag, the output remains right justified.
There are two exceptions where the '-' flag has a
different meaning: (1) with 'r' it denotes to use little
endian and (2) in case of a compound indicator it means that
no special handling of the members is applied. |
| '=' |
When the formatted result is shorter than the value
given by the width parameter, the output is centered.
If the central position is not possible it is moved slightly
to the right. In this case, if '-' flag is present in
addition to the '=' flag, it is moved slightly to the left. |
| '+' / *' '* |
Applies to numerical values. By default, positive numbers are not
formatted to include the + sign. With one of these two flags present,
positive numbers are preceded by a plus sign or a space.
When both flags are present, a plus sign is used.
In case of 'r', a big endian format is used. |
| '0' |
Is applied to numerical values that are printed right justified.
If the zero flag is present, the space left to the number is
filled with zeros instead of spaces. |
| '#' |
Denotes that an alternative output must be used. This depends on the type
to be formatted and the format character used. See the
sections below for more information. |
Width, Precision and Separator
The width parameter specifies the minimum width of the result.
The meaning of precision depends on the format indicator. For
integers it denotes the minimum number of digits printed, for
real numbers it denotes the number of fractional digits and for
strings and compound types it denotes the maximum number of elements
that are included in the output.
A separator is used for formatting numbers. If it is specified,
the output is divided into chunks of three digits, separated by a ','. The number of digits in a chunk can be given explicitly by
providing a number or a ''* after the ','.
In all three cases the number of digits can be replaced by a ''*. In this scenario, the next argument is used as the number of
digits. If the argument is a negative number, the precision and
separator parameters are considered unspecified. For width,
the absolute value is used and the '-' flag is set.
The separator can also be followed by a '?'. In that case,
an additional argument is used to specify the symbol that should be
used to separate the chunks.
Position
By default, the arguments are processed in the provided order. With
the position parameter it is possible to address arguments
directly. It is also possible to denote a series of arguments with
two numbers separated by ':', that are all processed in the same
way. The second number can be omitted. In that case the series ends
with the last argument.
It's also possible to use positional arguments for width, precision and separator by adding a number and a '$' after the ''*.
Types
This section describes the result of combining types with format
characters. It is organized in 2 subsections: a list of general
information regarding the formatting of types in the presence of
format characters and a table that contains details for every
available combination of type and format character.
When formatting types, the following rules apply:
If the format character is upper case, the resulting string will
be formatted using upper case letters.
The default precision for floating point numbers is 6 digits.
Rounding of floating point numbers adheres to the rounding mode
of the floating point unit, if available.
The floating point values NaN and Infinity are formatted as
nan and inf, possibly preceded by '+' or '-' sign.
Formatting reals is only supported for 64 bit reals and 80 bit reals.
All other reals are cast to double before they are formatted. This will
cause the result to be inf for very large numbers.
Characters and strings formatted with the 's' format character
inside of compound types are surrounded by single and double quotes
and unprintable characters are escaped. To avoid this, a '-'
flag can be specified for the compound specifier
(e.g. "%-(%s%)" instead of "%(%s%)" ).
Structs, unions, classes and interfaces are formatted by calling a
toString method if available.
See module std.format.write for more
details.
Only part of these combinations can be used for reading. See
module std.format.read for more
detailed information.
This table contains descriptions for every possible combination of
type and format character:
<th scope="col" width="20%">Type</th> <th scope="col" width="20%">Format Character</th> Formatted as... <td rowspan="1">null</td> 's' null
|<td rowspan="3">bool</td> 's' |
false or true |
| 'b', 'd', 'o', 'u', 'x', 'X' |
As the integrals 0 or 1 with the same format character.
Please note, that 'o' and 'x' with '#' flag
might produce unexpected results due to special handling of
the value 0. |
| 'r' |
\0 or \1 |
|<td rowspan="4">Integral</td> 's', 'd' |
A signed decimal number. The '#' flag is ignored. |
| 'b', 'o', 'u', 'x', 'X' |
An unsigned binary, decimal, octal or hexadecimal number.
In case of 'o' and 'x', the '#' flag
denotes that the number must be preceded by 0 and 0x, with
the exception of the value 0, where this does not apply. For
'b' and 'u' the '#' flag has no effect. |
| 'e', 'E', 'f', 'F', 'g', 'G', 'a', 'A' |
As a floating point value with the same specifier.
Default precision is large enough to add all digits
of the integral value.
In case of 'a' and 'A', the integral digit can be
any hexadecimal digit.
|
| 'r' |
Characters taken directly from the binary representation. |
|<td rowspan="5">Floating Point</td> 'e', 'E' |
Scientific notation: Exactly one integral digit followed by a dot
and fractional digits, followed by the exponent.
The exponent is formatted as 'e' followed by
a '+' or '-' sign, followed by at least
two digits.
When there are no fractional digits and the '#' flag
is not present, the dot is omitted. |
| 'f', 'F' |
Natural notation: Integral digits followed by a dot and
fractional digits.
When there are no fractional digits and the '#' flag
is not present, the dot is omitted.
Please note: the difference between 'f' and 'F'
is only visible for NaN and Infinity. |
| 's', 'g', 'G' |
Short notation: If the absolute value is larger than 10 ^^ precision
or smaller than 0.0001, the scientific notation is used.
If not, the natural notation is applied.
In both cases precision denotes the count of all digits, including
the integral digits. Trailing zeros (including a trailing dot) are removed.
If '#' flag is present, trailing zeros are not removed. |
| 'a', 'A' |
Hexadecimal scientific notation: 0x followed by 1
(or 0 in case of value zero or denormalized number)
followed by a dot, fractional digits in hexadecimal
notation and an exponent. The exponent is build by p,
followed by a sign and the exponent in decimal notation.
When there are no fractional digits and the '#' flag
is not present, the dot is omitted. |
| 'r' |
Characters taken directly from the binary representation. |
|<td rowspan="3">Character</td> 's', 'c' |
As the character.
Inside of a compound indicator 's' is treated differently: The
character is surrounded by single quotes and non printable
characters are escaped. This can be avoided by preceding
the compound indicator with a '-' flag
(e.g. "%-(%s%)"). |
| 'b', 'd', 'o', 'u', 'x', 'X' |
As the integral that represents the character. |
| 'r' |
Characters taken directly from the binary representation. |
|<td rowspan="3">String</td> 's' |
The sequence of characters that form the string.
Inside of a compound indicator the string is surrounded by double quotes
and non printable characters are escaped. This can be avoided
by preceding the compound indicator with a '-' flag
(e.g. "%-(%s%)"). |
| 'r' |
The sequence of characters, each formatted with 'r'. |
| compound |
As an array of characters. |
|<td rowspan="3">Array</td> 's' |
When the elements are characters, the array is formatted as
a string. In all other cases the array is surrounded by square brackets
and the elements are separated by a comma and a space. If the elements
are strings, they are surrounded by double quotes and non
printable characters are escaped. |
| 'r' |
The sequence of the elements, each formatted with 'r'. |
| compound |
The sequence of the elements, each formatted according to the specifications
given inside of the compound specifier. |
|<td rowspan="2">Associative Array</td> 's' |
As a sequence of the elements in unpredictable order. The output is
surrounded by square brackets. The elements are separated by a
comma and a space. The elements are formatted as key:value. |
| compound |
As a sequence of the elements in unpredictable order. Each element
is formatted according to the specifications given inside of the
compound specifier. The first specifier is used for formatting
the key and the second specifier is used for formatting the value.
The order can be changed with positional arguments. For example
"%(%2$s (%1$s), %)" will write the value, followed by the key in
parenthesis. |
|<td rowspan="2">Enum</td> 's' |
The name of the value. If the name is not available, the base value
is used, preceeded by a cast. |
| All, but 's' |
Enums can be formatted with all format characters that can be used
with the base value. In that case they are formatted like the base value. |
|<td rowspan="3">Input Range</td> 's' |
When the elements of the range are characters, they are written like a string.
In all other cases, the elements are enclosed by square brackets and separated
by a comma and a space. |
| 'r' |
The sequence of the elements, each formatted with 'r'. |
| compound |
The sequence of the elements, each formatted according to the specifications
given inside of the compound specifier. |
|<td rowspan="1">Struct</td> 's' |
When the struct has neither an applicable toString
nor is an input range, it is formatted as follows:
StructType(field1, field2, ...). |
|<td rowspan="1">Class</td> 's' |
When the class has neither an applicable toString
nor is an input range, it is formatted as the
fully qualified name of the class. |
|<td rowspan="1">Union</td> 's' |
When the union has neither an applicable toString
nor is an input range, it is formatted as its base name. |
|<td rowspan="2">Pointer</td> 's' |
A null pointer is formatted as 'null'. All other pointers are
formatted as hexadecimal numbers with the format character 'X'. |
| 'x', 'X' |
Formatted as a hexadecimal number. |
|<td rowspan="3">SIMD vector</td> 's' |
The array is surrounded by square brackets
and the elements are separated by a comma and a space. |
| 'r' |
The sequence of the elements, each formatted with 'r'. |
| compound |
The sequence of the elements, each formatted according to the specifications
given inside of the compound specifier. |
|<td rowspan="1">Delegate</td> 's', 'r', compound |
As the .stringof of this delegate treated as a string.
Please note: The implementation is currently buggy
and its use is discouraged. |
Source
std/format/package.d
Examples
Simple use:
// Easiest way is to use `%s` everywhere:
assert(format("I got %s %s for %s euros.", 30, "eggs", 5.27) == "I got 30 eggs for 5.27 euros.");
// Other format characters provide more control:
assert(format("I got %b %(%X%) for %f euros.", 30, "eggs", 5.27) == "I got 11110 65676773 for 5.270000 euros.");
Compound specifiers allow formatting arrays and other compound types:
/*
The trailing end of the sub-format string following the specifier for
each item is interpreted as the array delimiter, and is therefore
omitted following the last array item:
*/
assert(format("My items are %(%s %).", [1,2,3]) == "My items are 1 2 3.");
assert(format("My items are %(%s, %).", [1,2,3]) == "My items are 1, 2, 3.");
/*
The "%|" delimiter specifier may be used to indicate where the
delimiter begins, so that the portion of the format string prior to
it will be retained in the last array element:
*/
assert(format("My items are %(-%s-%|, %).", [1,2,3]) == "My items are -1-, -2-, -3-.");
/*
These compound format specifiers may be nested in the case of a
nested array argument:
*/
auto mat = [[1, 2, 3],
[4, 5, 6],
[7, 8, 9]];
assert(format("%(%(%d %) - %)", mat), "1 2 3 - 4 5 6 - 7 8 9");
assert(format("[%(%(%d %) - %)]", mat), "[1 2 3 - 4 5 6 - 7 8 9]");
assert(format("[%([%(%d %)]%| - %)]", mat), "[1 2 3] - [4 5 6] - [7 8 9]");
/*
Strings and characters are escaped automatically inside compound
format specifiers. To avoid this behavior, use "%-(" instead of "%(":
*/
assert(format("My friends are %s.", ["John", "Nancy"]) == `My friends are ["John", "Nancy"].`);
assert(format("My friends are %(%s, %).", ["John", "Nancy"]) == `My friends are "John", "Nancy".`);
assert(format("My friends are %-(%s, %).", ["John", "Nancy"]) == `My friends are John, Nancy.`);
Using parameters:
// Flags can be used to influence to outcome:
assert(format("%g != %+#g", 3.14, 3.14) == "3.14 != +3.14000");
// Width and precision help to arrange the formatted result:
assert(format(">%10.2f<", 1234.56789) == "> 1234.57<");
// Numbers can be grouped:
assert(format("%,4d", int.max) == "21,4748,3647");
// It's possible to specify the position of an argument:
assert(format("%3$s %1$s", 3, 17, 5) == "5 3");
Providing parameters as arguments:
// Width as argument
assert(format(">%*s<", 10, "abc") == "> abc<");
// Precision as argument
assert(format(">%.*f<", 5, 123.2) == ">123.20000<");
// Grouping as argument
assert(format("%,*d", 1, int.max) == "2,1,4,7,4,8,3,6,4,7");
// Grouping separator as argument
assert(format("%,3?d", '_', int.max) == "2_147_483_647");
// All at once
assert(format("%*.*,*?d", 20, 15, 6, '/', int.max) == " 000/002147/483647");
format : (alias template) formattedWrite = std.format.write.formattedWrite(Writer, Char, Args...)(auto ref Writer w, scope const Char[] fmt, Args args)Converts its arguments according to a format string and writes
the result to an output range.
The second version of formattedWrite takes the format string as a
template argument. In this case, it is checked for consistency at
compile-time.
Params:
w = an $(REF_ALTTEXT output range, isOutputRange, std, range, primitives),
where the formatted result is written to
fmt = a $(MREF_ALTTEXT format string, std,format)
args = a variadic list of arguments to be formatted
Writer = the type of the writer w
Char = character type of fmt
Args = a variadic list of types of the arguments
Returns:
The index of the last argument that was formatted. If no positional
arguments are used, this is the number of arguments that where formatted.
Throws:
A $(REF_ALTTEXT FormatException, FormatException, std, format)
if formatting did not succeed.
Note:
In theory this function should be @nogc. But with the current
implementation there are some cases where allocations occur.
See $(REF_ALTTEXT $(D sformat), sformat, std, format) for more details.
formattedWrite;
auto (local variable) std.array.Appender!string sinksink = std.array.Appender!string std.array.appender!string() pure nothrow @safeConvenience function that returns an Appender instance,
optionally initialized with array.
appender!(alias) object.string = stringstring();
static if (is((alias) Payload = sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"])Payload == double))
uint std.format.write.formattedWrite!(std.array.Appender!string, char, const(double), string)(ref std.array.Appender!string w, scope const(char[]) fmt, const(double) __param_2, string __param_3) pure @safeConverts its arguments according to a format string and writes
the result to an output range.
The second version of formattedWrite takes the format string as a
template argument. In this case, it is checked for consistency at
compile-time.
Note
In theory this function should be @nogc. But with the current
implementation there are some cases where allocations occur.
See sformat for more details.
Examples
import std.array : appender;
auto writer1 = appender!string();
formattedWrite(writer1, "%s is the ultimate %s.", 42, "answer");
assert(writer1[] == "42 is the ultimate answer.");
auto writer2 = appender!string();
formattedWrite(writer2, "Increase: %7.2f %%", 17.4285);
assert(writer2[] == "Increase: 17.43 %");
formattedWrite((local variable) std.array.Appender!string sinksink, "%.6g %s", (field) double uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double).valuevalue, (constant) string uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double).symbol = "m"symbol);
else
{
(field) sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"]) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"])).valuevalue.void sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"]).toString!(std.array.Appender!string)(ref scope std.array.Appender!string writer) const pure @safeWrites the vector as (name0: value0, name1: value1, ...).
toString((local variable) std.array.Appender!string sinksink);
uint std.format.write.formattedWrite!(std.array.Appender!string, char, string)(ref std.array.Appender!string w, scope const(char[]) fmt, string __param_2) pure @safeConverts its arguments according to a format string and writes
the result to an output range.
The second version of formattedWrite takes the format string as a
template argument. In this case, it is checked for consistency at
compile-time.
Note
In theory this function should be @nogc. But with the current
implementation there are some cases where allocations occur.
See sformat for more details.
Examples
import std.array : appender;
auto writer1 = appender!string();
formattedWrite(writer1, "%s is the ultimate %s.", 42, "answer");
assert(writer1[] == "42 is the ultimate answer.");
auto writer2 = appender!string();
formattedWrite(writer2, "Increase: %7.2f %%", 17.4285);
assert(writer2[] == "Increase: 17.43 %");
formattedWrite((local variable) std.array.Appender!string sinksink, " %s", (constant) string uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"])).symbol = "m"symbol);
}
return (local variable) std.array.Appender!string sinksink[];
}
}
enum (struct) uom_quantity_vector_composition.DimA dimension: an exponent vector in ℤ³ over (mass, length, time).
Dim (constant) uom_quantity_vector_composition.Dim uom_quantity_vector_composition.lengthDim = Dim(0, 1, 0)lengthDim = (struct) uom_quantity_vector_composition.DimA dimension: an exponent vector in ℤ³ over (mass, length, time).
Dim(length: 1);
enum (struct) uom_quantity_vector_composition.DimA dimension: an exponent vector in ℤ³ over (mass, length, time).
Dim (constant) uom_quantity_vector_composition.Dim uom_quantity_vector_composition.areaDim = Dim(0, 2, 0)areaDim = (struct) uom_quantity_vector_composition.DimA dimension: an exponent vector in ℤ³ over (mass, length, time).
Dim(length: 2);
alias (alias) uom_quantity_vector_composition.Length = uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)Length = (constant) uom_quantity_vector_composition.Dim uom_quantity_vector_composition.lengthDim = Dim(0, 1, 0)Quantity!((constant) uom_quantity_vector_composition.Dim uom_quantity_vector_composition.lengthDim = Dim(0, 1, 0)lengthDim, double);
alias (alias) uom_quantity_vector_composition.Area = uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double)Area = (constant) uom_quantity_vector_composition.Dim uom_quantity_vector_composition.areaDim = Dim(0, 2, 0)Quantity!((constant) uom_quantity_vector_composition.Dim uom_quantity_vector_composition.areaDim = Dim(0, 2, 0)areaDim, double);
// --- Ordering A: Quantity!(dim, Vec3) over the real sparkles:math.Vector -------
alias (alias) uom_quantity_vector_composition.Displacement = uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"]))Displacement = (constant) uom_quantity_vector_composition.Dim uom_quantity_vector_composition.lengthDim = Dim(0, 1, 0)Quantity!((constant) uom_quantity_vector_composition.Dim uom_quantity_vector_composition.lengthDim = Dim(0, 1, 0)lengthDim, (alias) uom_quantity_vector_composition.Vec3 = sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"])The numeric payload used by ordering A.
Vec3);
/// Dimension-aware dot for ordering A: wrap the numeric `Vector.dot` and re-attach
/// the grade the library discards.
(alias) uom_quantity_vector_composition.Area = uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double)Area uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) uom_quantity_vector_composition.dotA(in uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"])) x, in uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"])) y) pure nothrow @nogc @safeDimension-aware dot for ordering A: wrap the numeric Vector.dot and re-attach
the grade the library discards.
dotA(in (alias) uom_quantity_vector_composition.Displacement = uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"]))Displacement (parameter) const(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"]))) xx, in (alias) uom_quantity_vector_composition.Displacement = uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"]))Displacement (parameter) const(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"]))) yy) @safe pure nothrow @nogc
=> (struct) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double)Area((parameter) const(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"]))) xx.(field) sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"]) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"])).valuevalue.double sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"]).dot!double(in sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"]) rhs) const pure nothrow @nogc @safeDot product between two vectors.
dot((parameter) const(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"]))) yy.(field) sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"]) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"])).valuevalue));
// --- Ordering B: a minimal element-generic Vec(Scalar, N) ---------------------
//
// The element `T` need only support `+` and `*` — NOT be `isNumeric`. This is the
// proposed relaxation of `sparkles:math.Vector`'s `if (isNumeric!T)` constraint.
/// A vector whose element is any `+`/`*`-capable scalar — including a `Quantity`.
struct (struct) uom_quantity_vector_composition.Vec!(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double), 3LU)A vector whose element is any +/*-capable scalar — including a Quantity.
Vec(T, size_t N)
{
(alias) T = uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)T[(constant) ulong uom_quantity_vector_composition.N = 3LUN] (field) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)[3] uom_quantity_vector_composition.Vec!(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double), 3LU).datadata;
this(uom_quantity_vector_composition.Vec!(Quantity!(Dim(0, 1, 0), double), 3LU) uom_quantity_vector_composition.Vec!(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double), 3LU).this(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)[3] xs...) pure nothrow @nogc ref @safeT[(constant) ulong uom_quantity_vector_composition.N = 3LUN] (parameter) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)[3] xsxs...)
{
(field) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)[3] uom_quantity_vector_composition.Vec!(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double), 3LU).datadata[] = (parameter) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)[3] xsxs[];
}
/// Component-wise addition (both operands must share the element grade).
Vec Vec opBinary(string op : "+")(in Vec rhs) constComponent-wise addition (both operands must share the element grade).
opBinary(string op : "+")(in (unresolved type) VecVec (parameter) Vec rhsrhs) const
{
(unresolved type) VecVec _error_ rr;
foreach ((parameter) ii, ref (parameter) ee; r.r.datadata)
e = data[i] + rhs.rhs.datadata[i];
return r;
}
/// Dot product returns the ELEMENT product type: for `T = Length`, that is an
/// `Area`. The dimension falls out of the element's own `*` — no cast, no
/// dimension-blindness. This is the whole payoff of ordering B.
auto uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) uom_quantity_vector_composition.Vec!(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double), 3LU).dot!()(in uom_quantity_vector_composition.Vec!(Quantity!(Dim(0, 1, 0), double), 3LU) rhs) const pure nothrow @nogc @safeDot product returns the ELEMENT product type: for T = Length, that is an
Area. The dimension falls out of the element's own * — no cast, no
dimension-blindness. This is the whole payoff of ordering B.
dot()(in (struct) uom_quantity_vector_composition.Vec!(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double), 3LU)A vector whose element is any +/*-capable scalar — including a Quantity.
Vec (parameter) const(uom_quantity_vector_composition.Vec!(Quantity!(Dim(0, 1, 0), double), 3LU)) rhsrhs) const
{
auto (local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) accacc = (field) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)[3] uom_quantity_vector_composition.Vec!(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double), 3LU).datadata[0] * uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double).opBinary!("*", Dim(0, 1, 0), double)(in uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double) rhs) const pure nothrow @nogc @saferhs.uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double).opBinary!("*", Dim(0, 1, 0), double)(in uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double) rhs) const pure nothrow @nogc @safedata[0];
foreach ((local variable) ulong ii; 1 .. (constant) ulong uom_quantity_vector_composition.N = 3LUN)
(local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) accacc = (local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) accacc + uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double).opBinary!"+"(in uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) rhs) const pure nothrow @nogc @safedata[uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double).opBinary!"+"(in uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) rhs) const pure nothrow @nogc @safei] * uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double).opBinary!("*", Dim(0, 1, 0), double)(in uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double) rhs) const pure nothrow @nogc @saferhs.uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double).opBinary!("*", Dim(0, 1, 0), double)(in uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double) rhs) const pure nothrow @nogc @safedata[(local variable) ulong ii];
return (local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) accacc;
}
}
@("Quantity.composition.orderings-agree-and-B-is-dimension-correct")
@safe pure nothrow @nogc
unittest
{
// Ordering A: one dimension for the whole vector.
auto (local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"])) a1a1 = (struct) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"]))Displacement((struct) sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"])Vec3(3, 4, 0));
auto (local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"])) a2a2 = (struct) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"]))Displacement((struct) sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"])Vec3(3, 4, 0));
auto (local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) areaAareaA = uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) uom_quantity_vector_composition.dotA(in uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"])) x, in uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"])) y) pure nothrow @nogc @safeDimension-aware dot for ordering A: wrap the numeric Vector.dot and re-attach
the grade the library discards.
dotA((local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"])) a1a1, (local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"])) a2a2);
static assert(is(typeof((local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) areaAareaA) == Area));
assert((local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) areaAareaA.(field) double uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double).valuevalue == 25);
// Ordering B: a vector of Length elements; dot is an Area by construction.
auto (local variable) uom_quantity_vector_composition.Vec!(Quantity!(Dim(0, 1, 0), double), 3LU) b1b1 = (template instance) uom_quantity_vector_composition.Vec!(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double), 3LU)Vec!((alias) uom_quantity_vector_composition.Length = uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)Length, 3)(uom_quantity_vector_composition.Vec!(Quantity!(Dim(0, 1, 0), double), 3LU) uom_quantity_vector_composition.Vec!(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double), 3LU).this(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)[3] xs...) pure nothrow @nogc ref @safeLength(3), (struct) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)Length(4), (struct) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)Length(0));
auto (local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) areaBareaB = (local variable) uom_quantity_vector_composition.Vec!(Quantity!(Dim(0, 1, 0), double), 3LU) b1b1.uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) uom_quantity_vector_composition.Vec!(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double), 3LU).dot!()(in uom_quantity_vector_composition.Vec!(Quantity!(Dim(0, 1, 0), double), 3LU) rhs) const pure nothrow @nogc @safeDot product returns the ELEMENT product type: for T = Length, that is an
Area. The dimension falls out of the element's own * — no cast, no
dimension-blindness. This is the whole payoff of ordering B.
dot((local variable) uom_quantity_vector_composition.Vec!(Quantity!(Dim(0, 1, 0), double), 3LU) b1b1);
static assert(is(typeof((local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) areaBareaB) == Area));
assert((local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) areaBareaB.(field) double uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double).valuevalue == 25);
// The two orderings agree numerically.
assert((local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) areaAareaA.(field) double uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double).valuevalue == (local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) areaBareaB.(field) double uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double).valuevalue);
}
void void D main() @safemain() @safe
{
import (package) stdstd.(module) std.stdioCategory Symbols File handles _popen File isFileHandle openNetwork stderr stdin stdout Reading chunks lines readf readfln readln Writing toFile write writef writefln writeln Misc KeepTerminator LockType StdioException
Standard I/O functions that extend core.stdc.stdio. core.stdc.stdio
is publically imported when importing std.stdio.
There are three layers of I/O:
The lowest layer is the operating system layer. The two main schemes are Windows and Posix.
C's stdio.h which unifies the two operating system schemes.
std.stdio, this module, unifies the various stdio.h implementations into
a high level package for D programs.
Source
std/stdio.d
stdio : (alias template) writeln = std.stdio.writeln(T...)(T args)Equivalent to write(args, '\n'). Calling writeln without
arguments is valid and just prints a newline to the standard
output.
Params:
args = the items to write to stdout
Throws:
In case of an I/O error, throws an $(LREF StdioException).
Example:
Reads stdin and writes it to stdout with an argument
counter.
import std.stdio;
void main()
{
string line;
for (size_t count = 0; (line = readln) !is null; count++)
{
writeln("Input ", count, ": ", line);
}
}
---
writeln;
// The blocker, stated as a machine-checked fact: the current Vector cannot
// hold a Quantity element, but the element-generic Vec can.
static assert(!__traits(compiles, (template instance) sparkles.math.vector.Vector!(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double), 3)Vector!((alias) uom_quantity_vector_composition.Length = uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)Length, 3)),
"sparkles:math.Vector requires isNumeric!T — a vector of Quantities is unnameable");
static assert(__traits(compiles, (struct) uom_quantity_vector_composition.Vec!(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double), 3LU)A vector whose element is any +/*-capable scalar — including a Quantity.
Vec!((alias) uom_quantity_vector_composition.Length = uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)Length, 3)),
"the element-generic Vec accepts a Quantity element (the proposed relaxation)");
auto (local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"])) edgeedge = (struct) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"]))Displacement((struct) sparkles.math.vector.Vector!(double, 3LU, ["x", "y", "z"])Vec3(3, 4, 0));
auto (local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) viaAviaA = uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) uom_quantity_vector_composition.dotA(in uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"])) x, in uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"])) y) pure nothrow @nogc @safeDimension-aware dot for ordering A: wrap the numeric Vector.dot and re-attach
the grade the library discards.
dotA((local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"])) edgeedge, (local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), Vector!(double, 3LU, ["x", "y", "z"])) edgeedge);
auto (local variable) uom_quantity_vector_composition.Vec!(Quantity!(Dim(0, 1, 0), double), 3LU) edgeBedgeB = (template instance) uom_quantity_vector_composition.Vec!(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double), 3LU)Vec!((alias) uom_quantity_vector_composition.Length = uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)Length, 3)(uom_quantity_vector_composition.Vec!(Quantity!(Dim(0, 1, 0), double), 3LU) uom_quantity_vector_composition.Vec!(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double), 3LU).this(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)[3] xs...) pure nothrow @nogc ref @safeLength(3), (struct) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)Length(4), (struct) uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)Length(0));
auto (local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) viaBviaB = (local variable) uom_quantity_vector_composition.Vec!(Quantity!(Dim(0, 1, 0), double), 3LU) edgeBedgeB.uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) uom_quantity_vector_composition.Vec!(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double), 3LU).dot!()(in uom_quantity_vector_composition.Vec!(Quantity!(Dim(0, 1, 0), double), 3LU) rhs) const pure nothrow @nogc @safeDot product returns the ELEMENT product type: for T = Length, that is an
Area. The dimension falls out of the element's own * — no cast, no
dimension-blindness. This is the whole payoff of ordering B.
dot((local variable) uom_quantity_vector_composition.Vec!(Quantity!(Dim(0, 1, 0), double), 3LU) edgeBedgeB);
void std.stdio.writeln!(string, uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double))(string __param_0, uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) __param_1) @safeEquivalent to write(args, '\n'). Calling writeln without
arguments is valid and just prints a newline to the standard
output.
Example
Reads stdin and writes it to stdout with an argument
counter.
import std.stdio;
void main()
{
string line;
for (size_t count = 0; (line = readln) !is null; count++)
{
writeln("Input ", count, ": ", line);
}
}
writeln("ordering A Quantity!(length, Vec3) |edge|² = ", (local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) viaAviaA);
void std.stdio.writeln!(string, uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double))(string __param_0, uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) __param_1) @safeEquivalent to write(args, '\n'). Calling writeln without
arguments is valid and just prints a newline to the standard
output.
Example
Reads stdin and writes it to stdout with an argument
counter.
import std.stdio;
void main()
{
string line;
for (size_t count = 0; (line = readln) !is null; count++)
{
writeln("Input ", count, ": ", line);
}
}
writeln("ordering B Vec!(Length, 3) |edge|² = ", (local variable) uom_quantity_vector_composition.Quantity!(Dim(0, 2, 0), double) viaBviaB);
void std.stdio.writeln!(string, bool, string)(string __param_0, bool __param_1, string __param_2) @safeEquivalent to write(args, '\n'). Calling writeln without
arguments is valid and just prints a newline to the standard
output.
Example
Reads stdin and writes it to stdout with an argument
counter.
import std.stdio;
void main()
{
string line;
for (size_t count = 0; (line = readln) !is null; count++)
{
writeln("Input ", count, ": ", line);
}
}
writeln("Vector!(Quantity, N) compiles today? ",
__traits(compiles, (template instance) sparkles.math.vector.Vector!(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double), 3)Vector!((alias) uom_quantity_vector_composition.Length = uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)Length, 3)), " (the isNumeric!T blocker)");
void std.stdio.writeln!(string, bool, string)(string __param_0, bool __param_1, string __param_2) @safeEquivalent to write(args, '\n'). Calling writeln without
arguments is valid and just prints a newline to the standard
output.
Example
Reads stdin and writes it to stdout with an argument
counter.
import std.stdio;
void main()
{
string line;
for (size_t count = 0; (line = readln) !is null; count++)
{
writeln("Input ", count, ": ", line);
}
}
writeln("Vec!(Quantity, N) compiles? ",
__traits(compiles, (struct) uom_quantity_vector_composition.Vec!(uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double), 3LU)A vector whose element is any +/*-capable scalar — including a Quantity.
Vec!((alias) uom_quantity_vector_composition.Length = uom_quantity_vector_composition.Quantity!(Dim(0, 1, 0), double)Length, 3)), " (element-generic — the recommendation)");
}